Manufacturing

Robonaut 2: Industrial Opportunities
available technology

Robonaut 2: Industrial Opportunities

NASA, GM, and Oceaneering approached the development of R2 from a dual use environment for both space and terrestrial application. NASA needed an astronaut assistant able to function in space and GM was looking for a robot that could function in an industrial setting. With this in mind, R2 was made...
available technology

RonJohn

RonJohn, a urethane and coating remover, was developed to replace hazardous or flammable solvents such as methylene chloride, acetone, toluene, xylene, and methanol. RonJohn not only improves safety but is also more effective than many other solvents used to strip paint and remove adhesives,...
available technology

RonJohn

RonJohn, a urethane and coating remover, was developed to replace hazardous or flammable solvents such as methylene chloride, acetone, toluene, xylene, and methanol. RonJohn not only improves safety but is also more effective than many other solvents used to strip paint and remove adhesives,...
available technology

SAMPLING SYSTEM AND PROCESS FOR SAMPLING

A sampling system includes an analyte sampler that includes an enclosure; a mount disposed in the enclosure; a capillary tube disposed in the mount; and a thermal member disposed in the enclosure. The sampling system also includes a manifold in fluid communication with the analyte sampler. A...
available technology

Scatterometer with adaptable spatial resolution

A global positioning system (GPS) ocean scatterometer with an adaptable spatial resolution for sensing and processing GPS signals reflected from an ocean surface for wind measurements in a wide range of altitudes and wind velocities. To increase wind sensitivity at low altitudes, the GPS ocean...
available technology

SELF ALIGNED COPLANAR WAVEGUIDES

Coplanar waveguides (CPWs) with a continuous, self-aligned gap between the center trace and the ground plane are described with the additional functionality that a bridge between the two grounds is left as a crossover. The width of the gap can be made in the lOO's of nm range using optical...

Pages