CCDC Armaments Center


FLC Region

Security Lab



Building 93, 3rd Floor
Picatinny Arsenal, NJ 07806-5000
United States

Want more information? Contact a representative below.

Laboratory Representative


In 1977, the Government created the U.S. Army Armament Research and Development Center (ARRADCOM) to take charge of improving old and creating new weapons and munitions. ARRADCOM was located at Picatinny Arsenal in Northern New Jersey, a site in existence since 1880 as the Dover/Picatinny Powder Depot, later being renamed the Picatinny Arsenal by the Army in 2007.
In 1983, the Army disestablished ARRADCOM and placed its mission under its Armament, Munitions, and Chemical Command (AMCCOM) at Rock Island Arsenal in Illinois. The bulk of weapons and munitions research and development remained at the Picatinny site, under the name of the U.S. Army Armament Resarch and Development Center (ARDC). In 1986, ARDC became ARDEC, the U.S. Army Armament Research, Development and Engineering Center. The name remained the same despite the center's transfer from AMCCOM to the Tank-automotive and Armament Command (TACOM) in 1994 and to the Research, Development and Engineering Command (RDECOM) in 2003.
Throughout the name changes, the organization retained the same mission: to develop high quality weapons and munitions for U.S. troops. ARDEC continues to be the U.S. Army's principle researcher, developer and sustainer of of current and future armament and munitions systems. The organization is comprised of other sites in addition to Picatinny Arsenal: Benet Laboratories at Watervliet Arsenal, N.Y., Rock Island III.; Aberdeen Proving Ground, MD; and Adelphi MD.

ARDEC, the largest tenant at Picatinny, provides the technology for over 90 percent of the Army's conventional lethality and a significant portion of all other Services' lethality through fully-integrated life-cycle engineering (from research and development to demilitarization). With synergy being maximized through the consolidation of Department of Defense (DOD) RDTE munitions, propellants and explosives functions, ARDEC is directly contributing to DOD's transformation efforts, and has numerous world-class and one-of a kind R&D facilities, utilities and the infrastructure in place to support additional joint missions and functions. Located in a high technology metropolitan area, near a multitude of industry and academic partners, it is easier to attract and retain strong science and engineering talent.

During 2007, ARDEC became the first DOD organization in history selected to receive the Malcolm Baldrige National Quality Award and is also the recipient of many other prestigious national awards that include the Presidential Award for Quality, two Army Communities of Excellence Awards and several Army Research and Development Organization of the Year Awards.
ARDEC-developed items, which proved their worth during Operation Desert Storm in 1991, included the warhead for the Patriot missile, the fire control systems and the ammunition for the Bradley fighting vehicle, the Abrams tank, and the laser guided Copperhead artillery projectile. These items were still in use 10 years later during the conflicts in Afghanistan and Iraq. ARDEC's Bunker Defeat Munition played a key role in Afghanistan. In addition, the XM107 sniper rifle, the 120mm M919 and M830 high explosive-multipurpose tank round, the M211 and M212 countermeasure flares, the M4 carbine, and several types of small arms ammunition and electric detonators were singled out and praised during the Iraqi fighting.


ARDEC's mission is to empower, unburden, and protect the Warfighter by providing superior armaments solutions that dominate the battlefield. ARDEC develops and maintains a customer-focused, world-class workforce that executes, manages, and continuously improves integrated life cycle engineering processes required for the research, development, production, field support, and demilitarization of weapons, munitions, fire control, and associated items. This includes improving already fielded items; developing new items; maintaining a strong armament technology base in government, industry, and academia; and providing technical support to soldiers in the field. Representative ARDEC programs exist in the following phases of the acquisition process: technology base, demonstration, development, production, and deployment. ARDEC's core mission areas are:
  • Advanced Weapons Systems
  • Fire Control
  • Advanced Energetics, Warheads, and Ammunition
  • Ammunition Logistics RDTE

The success in ARDEC's technology transfer program plays an important role in demonstrating ARDEC as a leader in technology innovation. ARDEC partners with a wide variety of organizations including industry, academia, and other government organizations to accelerate the development and transition of new and innovative technologies for the Warfighter. While the center's efforts are concentrated in major business areas, ARDEC is also making strategic investments in new business development areas. ARDEC's research investment has demonstrated commercial spin-off benefits for our nation's civilian economy as well.Under Homeland Defense, ARDEC has been working to exploit core competencies such as sensors, non- lethal systems, and knowledge management, as well as growth areas to include defeat of lethal mechanisms/IEDs, biometrics, and training of medical and tactical personnel. ARDEC also has numerous alliances with industry partners and academic institutions and has strategically partnered through "Master" CRADAs to advance technologies supporting the Future Force. A one-of-a-kind organization, ARDEC provides virtually all of the lethal mechanisms used in Army weapon systems and those of the other military services; there is no commercial or government equivalent.

ARDEC also uses technology transfer agreements such as CRADAs and TSAs to enable military industry to access the technology expertise and capabilities of ARDEC to support industry performance under DOD Acquisition Programs. DOD acquisition policy requires flow down of extensive management control tools that are new to ARDEC, as we have historically been the "buyer" rather than the "supplier". Earned Value Management (EVM) systems are just one example which is being implemented to improve management processes accordingly.

To maximize ARDEC effectiveness, well-designed protocols that expedite diverse tech transfer agreements have been developed, all of which advance the Center's ambitious strategic objectives: to provide the latest technology to today's warfighter and simultaneously support the complete transformation of the nation's future forces.

Through teaming with the Army's Program Executive Office community, Program Managers, and ARDEC research managers, a new group of stakeholders who previously had not used technology leveraging tools such as CRADAs, TSAs, or PLAs as part of their Defense Acquisition strategies has been developed. As a result, tech transfer from laboratory to marketplace is faster, less costly, and fully leverages ARDEC's own human resources and its R&D facilities. This unusual inclusive approach has greatly enhanced communication throughout ARDEC's T2 system, with program managers consulting with the ARDEC Technology Transfer Office well in advance of possible formal transfer to outside partners.
ARDEC partners with a wide variety of organizations including industry, academia and other Government organizations to accelerate the development and transition of new technologies for the warfighter. ARDEC's research investment has also demonstrated commercial spin-off benefits for the nation's civilian economy. Material science, manufacturing processes, virtual reality and simulation, image processing, and non-destructive testing are just a few of the capabilities available to the private sector.

Technology Disciplines

Displaying 1 - 10 of 423
105MM case telescoped ammunition (CTA) for use in multi-role armament ammunition system (MRAAS) - Title changed to LARGE CALIBER CASE TELESCOPED AMMUNITION
40 mm extended range high performance projectile with rocket and guidance navigation control capability and decoupling device
A Finless training projectile with improved flight stability over an extended range
A missile system for breaching reinforced concrete barriers utilizing hinged explosively formed projectile warheads
A non-lethal ammunition utilizing a dense powder ballast and a two stage firing sequence
A variable drag stabilizer for limiting the flight range of a training projectile
Active ammunition magazine
Adaptable water harvesting apparatus
Adapter extension for rifle fired muzzle mounted grenades
Adaptive fragmentation mechanism to enhance lethality


Displaying 81 - 90 of 102
Pyrotechnic Laboratory
Pyrotechnic Pilot Manufacturing Facility
RADAR Anechoic Chamber/RCS Measurements Lab
Radiological Analysis & Development Facility
Rapid Prototyping and Reverse Engineering Facility
Rapid Prototyping Laboratory
Reliability Physics/Failure Analysis Laboratory
Remote Machining and Evaluation of Explosively Filled Munitions
Scanning Electron Microscope Analysis System
Software Engineering Laboratory



No Equipment


No Programs


No Funds


No Publications


No News


No Successes

CCDC Armaments Center
Publication DateJan 15, 2020

The Department of the Army hereby gives notice of its intent to grant to IXI Technology Holding Inc., a company having its principle place of business at 22705 Savi Ranch Pkwy, Ste. 200, Yorba Linda, CA 92887, an exclusive license for a period of 10 years to US Patent Application No. 16/233,344 (“Distributed Geospatial Communications System for UAV Monitoring,” filed 27 December 2018), US Patent No. 7,283,045 (“System and method for semi-distributed event warning notification for individual entities, and computer program product therefor,” filed 12 July 2006), US Patent No. 7,598,850 (“System and method for centralized event warning notification for individual entities, and computer program product therefor,” filed 12 July 2006), US Patent No. 7,602,281 (“System and method for tactical distributed event warning notification for individual entities, and computer program product therefor,” filed 19 July 2006), and US Patent No. 7,764,185 (“System, user warning and positioning device for use therein, and computer program product therefor, for tactical distributed event warning notification for individual entities,” filed 19 July 2006).

Written objections must be filed not later than 15 days following publication of this announcement.
Send written objections to U.S. Army Combat Capabilities Development Command Armaments Center, Technology Transfer/Business Interface Office, FCDD-ACE-B/Andrew Lenz, Building 93, Picatinny Arsenal, NJ 07806-5000.
For further information contact:

Andrew Lenz, (973) 734-6043, Email:

Supplementary information:

Any license granted shall comply with 35 U.S.C. 209 and 37 CFR Part 404.

Send Inquiry