Available Technology

Compact Sensor for In-Situ Gas Species Determination and Measurement

For real-time optical monitoring of gas density, temperature, type, and concentration
NASA's gas sensor was originally developed for the storage of volatile liquids and high-pressure gases in outer space in order to facilitate space travel. The innovation has a diverse array of applications beyond aerospace, including cryogenic environments, pressurized or vacuum conditions, and hazardous locations. The sensor system is composed of 1) a fiber-coupled laser light source, 2) a fiber-coupled photodiode detector, and 3) an optical interferometer. The non-intrusive sensor employs a number of optical techniques to measure gas density, temperature, type of species present, and concentration of various species. When the sensor is placed in the area where a gas leak may be present, gas density is detected and recorded as a result of changes in light transmission through the fiber. Changes in the density of gas in the test region cause corresponding changes in the intensity output onto a photodiode detector. This process provides a real-time, temporal history of a leak. Gas temperature is determined by placing an optical fiber along the length of a structure for in-situ measurements. The type of gas species present can be determined by using optical line emission spectrometry. The light-based sensor uses these interferometric and spectroscopic techniques to obtain real-time, in-situ measurements that have been successfully tested in environments with a pressure range of 20 mtorr to 760 mtorr. Commercially available gas detection methods are limited in several ways. Vacuum gauges can detect only certain gases, and they have a limited operational range. Mass spectrometer systems are able to perform well, but their size, bulk, and use of high voltage, which can potentially cause arcing and ignition of combustible propellants, severely limit their usefulness. NASA's compact gas detection sensor has numerous advantages over other state-of-the-art detection techniques. Because the sensor is rugged, compact, and lightweight, it can be used in small, remote areas where other devices will not fit. It has no electronic ignition device, making the system suitable for use in explosive or hazardous environments. The system measures gas density, temperature, type, and concentration in real time, providing critical information on both the severity and location of the leak, all while consuming minimal power at very low cost.
Abstract: 
NASA's Marshall Space Flight Center researchers have developed a compact, lightweight, integrated gas sensor capable of monitoring and detecting leaks in real time. The fiber-optic, laser-based leak detector uses an array of interferometric and spectroscopic techniques to measure gas density, temperature, species determination, and species concentrations. It is constructed from solid optics, compact enough to be used in the smallest of recesses, and consumes very little power. This technology can be used in space-based applications as well as numerous commercial industries, including automotive manufacturing, aerospace, natural gas, semiconductors, electronics, refrigeration, fuel cells, and distributed power.
Benefits: 

Compact: Fits in small areas where larger and more fragile mass spectrometers cannot

applications: 

Industrial manufacturing facilities

Industrial storage facilities

Distributed power for small-scale or utility-scale fuel cells

Facilities or processing involving or housing toxic, hazardous, or explosive gases

Semiconductor and electronics processing

Reps: 
Patent Number: 
8,330,961
Internal Laboratory Ref #: 
MFS-TOPS-32
Patent Status: 
Patent Issue Date: 
June 11, 2015
Agency
NASA
Region
Southeast
State: 
Alabama
Lab Representatives
Share to Facebook Share to Twitter Share to Google Plus Share to Linkedin